How to use a public EV charger for the first time (and what to do when it doesn't work)

Updated November 6, 2026 · By the PlugCompass team

Find a charger with your car's plug, check the price and how to pay, park and plug in, start the session (card, app, QR code or charge card), and stop it from the car or the charger before you unplug. If a charger doesn't work: re-seat the plug, try another payment method, try another connector, then call the number on the charger and report it.

Before you go

Step by step at the charger

  1. Park so the cable reaches your charge port without stretching. Don't block a charger you're not using.
  2. Choose how to pay. Common options: a credit or debit card on a reader (often contactless), a QR code that opens a payment page, the operator's app, or an RFID charge card.
  3. Plug in firmly until it clicks. On many chargers you authorize first and then plug in; on others it's the other way round. The screen tells you which.
  4. Check that charging started: the car's dashboard or app and the charger's screen should show power flowing.
  5. Stop the session in the car, the app or on the charger, or by tapping the same card. Many cars lock the plug while charging; unlock the car to release it.
  6. Hang up the cable and move your car once you're done; some chargers add idle fees after the session ends.

What the rules say about paying

When a charger doesn't work

  1. Re-seat the plug. Unplug, check for dirt or ice in the connector, and push it in firmly until it locks.
  2. Check the car: unlock it, make sure no charge limit or charging schedule is set that delays charging, and that the charge port isn't locked.
  3. Try another way to pay (card instead of app, or the other way round), and wait for the screen before plugging in.
  4. Try another connector or charger at the same site. If only one post fails, it's usually that post.
  5. Call the support number on the charger. Give the charger or connector ID printed on it; support can often restart it remotely.
  6. Report it so the next driver knows: tap "Did it work?" on the station in PlugCompass, and tell the operator.
  7. Have a plan B: before a long trip, note a second charger near each stop.

If charging starts but is much slower than expected, the car may be limiting power (cold battery, battery nearly full) or the charger may be sharing power with the car next to it.

Frequently asked questions

Do I need an app to use a public EV charger?
Not always. Many chargers take a credit or debit card, a contactless card or a QR code payment page. In the EU, new chargers of 50 kW and more must take payment cards, and U.S. chargers built with federal NEVI funding must take contactless card payment without a membership.
What should I do if a charger doesn't start?
Check that the plug is pushed in fully and the car is unlocked, try another payment method, then another connector or charger. If it still fails, call the support number shown on the charger and note the charger ID. Reporting it helps the next driver.
How do I know what charging will cost before I start?
Look for the price on the charger's screen or label, or on the payment page. EU rules require the ad hoc price to be shown at the charger or before you start, and U.S. NEVI-funded chargers must show the price in $/kWh before the session.

Sources

More guides